HIGH PERFORMANCE MARINE POWDER COATING At first the steel is garnet blasted to create a surface profile. The parts are then preheated to 400 degrees, and then the first coat of 3m scotch coat 134 or Zinc rich epoxy is applied, at approximately 4-6 mils. The part is then re-entered into the oven once again at 400 degrees to fully gel the epoxy coating. Then it is brought out and a full coat of polyester powder is electro-statically applied. Once it is fully coated it is then reentered into the oven, again at 400 degrees for approximately 30 min to fully cure the powder to the substrate. The part is then removed from the oven to cool down and it is complete. POWDER COATING POWDER COATING begins with all parts being garnet blasted to remove old paint, surface contaminants and oxidation. The surface is also etched by abrasive blasting to provide a profile so the dry powdered resin can bond as it gels. The parts are first preheated to 400º and then the powder is applied. The POWDER COATING to metal attachment becomes tenacious as the gel cures "rock" hard in the oven. POWDER COATING is unquestionably the most preferred coating we apply for general use. The cosmetics are superior to sprayed liquid paints and the longevity surpasses all but the most specialized marine paints. The part is then removed from the oven to cool down and it is complete. HIGH PERFORMANCE MARINE EXTERIOR COATINGS FOR STEEL (Paint) SANDBLASTING PROVIDES THE IDEAL SURFACE FOR HIGH PERFORMANCE COATINGS. SANDBLASTING REMOVES OLD PAINT, CORROSION, MIL-SCALE AND OTHER CONTAMINANTS THAT MAY ADVERSELY AFFECT ADHESION OF THE NEW COATINGS. EQUALLY IMPORTANT, THE PROCESS PROVIDES A SURFACE ETCH FOR THE LIQUID COATING TO FILL AND MECHANICALLY ATTACH ITSELF TO. INORGANIC ZINC PRIMER, AS WELL AS ZINC METAL SPRAY, IS FOLLOWED BY 1 TO 2 COATS OF AN INTERMEDIATE COAT OF EPOXY AND TOP COATING OF POLYURETHANE, IS CONSIDERED THE BEST SYSTEM AVAILABLE TODAY. THESE THREE COATINGS WORK AS A “TEAM”. THE COMBINATIONS WILL PROTECT AND ENHANCE THE APPEARANCE BETTER THAN ANY 3 APPLICATIONS OF ANY SINGLE COATING. ZINC COATINGS ARE A SACRIFICIAL COATING. IT “GIVES ITSELF UP” (SIMILAR TO GALVANIZING) TO PROTECT THE SUBSTRATE. IT PREVENTS CORROSIVE UNDERCUTTING OF THE TOPCOATS WHEN A BREAK OR CHIP OCCURS IN THE SURFACE OF THE PAINT. THE EPOXY INTERMEDIATE COAT IS USED TO PROTECT THE ZINC AND PROVIDEAN ADHESIVE BASE FOR THE TOP COAT. EPOXY IS SUPERIOR GENERAL PURPOSE ANTI-CORROSIVE. IT CANNOT PROVIDE A GLOSSY FINISH AND EPOXY WILL BREAK DOWN UNDER PROLONGED EXPOSURE TO THE SUN. A TOPCOAT IS REQUIRED. THE POLYURETHANE TOP COATING IS SIMPLY THE PREMIER GLOSSY LONG-LIVED FINISH FOR YOUR METAL PARTS AND STRUCTURES. IT PROTECTS THE EPOXY FROM SUNLIGHT AND PROVIDES A HIGHLY AESTHETIC APPEARANCE. VIRTUALLY ALL COMMERCIAL AIRCRAFT, CUSTOM YACHTS, AND “LONG-HAUL” TRUCKS USE POLYURETHANE FOR THE FINAL COAT. COST IS ALWAYS AN IMPORTANT CONSIDERATION. WE BELIEVE THAT THE COST OF COATING SERVICES SHOULD BE FACTORED OVER THE LIFE OF THE COATING. WE CAN DEMONSTRATE THAT SERVICE LIFE COSTS ARE LOWER WHEN SANDBLASTED AND HIGH PERFORMANCE COATINGS ARE USED TO FINISH YOUR METAL PARTS. IF YOU HAVE ANY FURTHER QUESTIONS OR UNIQUE COATING PROBLEMS, OUR KNOWLEDGABLE STAFF IS AVAILABLE TO ASSIST YOU.
Soltek Pacific, established in 1974 offers expertise in Design-Build, Construction Management and Construction projects including renovation and modernization projects for public and private clients. Soltek Pacific's professional versatility and ability to provide exceptional management and unparalleled expertise over a wide spectrum of projects, including the reconstruction of educational facilities, historic structures, industrial complexes, specialized military structures and correctional facilities has won us repeat clients over our 36 year history. As one of the largest building contractors in San Diego County, Soltek Pacific is recognized as a leading force within the construction community and was ranked 202nd nationally according to Engineering News-Record (Top 400 Contractors). It is Soltek's dedication to quality that has made us the builder of choice for many of our clients.
Current Solar Contracting is family owned and operated. As an expansion of Current Electrical Contracting, Inc., Current Solar Contracting was developed to offer consumers a cleaner, renewable energy source.
Fannin Built Construction is one of the San Diego's top construction contractors providing custom built homes, room additions, kitchen remodeling and bathroom remodeling throughout San Diego county. Whether you're looking to expand your existing home, renovate the entire home, or build a custom crafted home, call Fannin Built Construction and let us share our expertise with you. Fannin Built Construction is a licensed contractor (LIC# 970161) with more than 15 years in the construction industry. We are a locally-owned, San Diego based construction company, not a franchise or giant corporation. When you choose to work with Fannin Built Construction, owner Clint Fannin will be onsite with his skilled craftsmen, paying attention to every detail. At Fannin Built, we LOVE SAN DIEGO. We grew up here, we're raising our families here, and we genuinely love the community of San Diego. We treat each and every one of our clients as if they are part of our family -- and we take care of them.
Trabus Technologies is a minority-owned, service disabled veteran owned small business (SDVOSB), providing professional and technical services to federal, state, and local governments. Located in San Diego, California, Trabus incorporated with a leadership team that has proven experience in both government acquisition and federal contracting, with an average of 25 years of collective service in both public and private capacities. Trabus leadership has past DOD Level III certifications in Program Management and Systems Engineering. They are well suited to provide services support in the areas of System Acquisition, Systems Engineering, Field Support, Financial Analysis, Logistics, Contract Administration, and Administrative Support to all echelons of the government hierarchy. Trabus is a growing firm seeking value-added partners. With technical competence in communications, information technology, information assurance, sensors, and wireless technologies, the TRABUS team stands ready to support the offices of both military and government agencies. Trabus Technologies is ready to become your trusted partner, determined to excel through superior performance, as well as providing solutions that are relative, responsive, and adaptive. TRABUS is ready to serve.
Terminix in San Diego, CA can protect your family against pests, termites and bed bugs. Founded in 1927, Terminix is the largest termite and pest control company in the world, safeguarding over 4.1 million homes and businesses against all types of pests. Our company consists of 864 service locations in 45 U.S. states and 14 countries internationally. For decades, our team of skilled entomologists has studied all types of insects to ensure that our pest and bug exterminators can give our customers the most complete protection from infestation.
www.LawyerinBlueJeans.com (619) 683-2545 The Lawyer in Blue Jeans Group is a company dedicated to providing efficient and accurate legal representation and document preparation at reasonable prices. The company was founded by Jeffrey A. Isaac; an experienced attorney, author, radio and television personality, and former law professor. The Lawyer in Blue Jeans Group offers a niche within the legal profession that makes it possible to obtain high-quality legal assistance at prices that are highly competitive. Our staff consists of knowledgeable attorneys, skilled paralegals and legal assistants prepared to assist you through the process of meeting your legal needs. All work and documents prepared by our staff are supervised closely by an attorney.